Lunchbox - pupil package

To sew a lunchbox you need:
- lunchbox panel
- clamp
- support tape
You can find it all in the DIY Pupil's Bundle kit!

{{useMaterials}}

1. Cut out the lunchbox components from the kit:
- 1x top layer
- 1x bottom of the top layer
- 1x lining
- 1x bottom of lining

2. Fold the right sides of the top and lining together and sew.

3. Sew the bottoms to the bottom of the top and lining. Remember, when you get to the corner of the bottom, leave the needle stuck in the fabric, lift the foot and turn the fabric "on the needle". This will help you create a perfect rectangle.
Incise the corners.

4. Mount the support tape to the buckle elements and pin it to the top of the lunchbox exactly in the middle of its sides. To mark the center, fold the lunchbox in half and make gentle cuts where the bends are.

5. Sew the lining. Insert the lining into the top of the lunchbox so that they are folded right sides together, lay out the seam allowances, leave an opening for turning it out.

6. Turn the lunchbox right side out.

7. Your lunchbox is already sewn together, quilt it only to two millimeters from the top, at the same time stitching the opening that was left for folding it out.

Done!

Iwona Bartczak